DianeCeiling MountedOscillating Directional Fan\READ AND SAVE THESE INSTRUCTIONSFAN RATING AC 120V. 60HzMODEL: AC-MGB2
TOOLS AND MATERIALSREQUIRED• Philips screw driver• Standard, flat-head screw driver• 11 mm wrench• Step ladder• Wire cuttersPACKAGE CONTENTS\ \ \1\\Un
2READ AND SAVE THESE SAFETY AND INSTAllATIONINSTRUCTIONS.Consult a licensed electrician if unsure of any point below mentioned.DANGERIW ARN ING/CA UTI
11. To reduce the risk of personal injury, install the supplementary mounting means and use onlythe hardware provided with the fan.12. Warning: TO RED
MOUNTING/INSTALLATIONOF THE FANBefore touching a screw driver thoroughlyread these instructions.Warning/Caution: Before installing fan, turnoff power
5 C. Wooden Blade Head: If your fan is onewith wooden blade head, attach your blades asthe last step in the assembly process. Do notattach them now. A
2. Motor to Receiver Electrical Connections:A. Connect the WHITE wire from the fan to theWHITE wire marked "TO MOTOR N" from theReceiver.B.
OPERATING THE REMOTECONTROLInstall12V MN21/A23 battery (included).To prevent damage to transmitter, remove thebattery if not used for long periods. (F
,!CARE OF AND TROUBLESHOOTING YOUR FAN1. Check hardware bi-yearly. Because of the fan's natural movement some connections maybecome loose over ti
Comments to this Manuals