Model PLMS
Features
• Light comes on when motion is detected.
• Automatically controls existing post light.
• Dual Light Level.
• Photocell keeps the light off during day-
light hours.
This package includes:
240-031-A
© 2003 Atlas Lighting Products, Inc. 598-1095-01
Mode: On-Time Works: Day Night
Test 5 Sec x x
Auto 1, 5, or 20 Min x
Manual To Dawn* x
Accent 3,6 Hr, to Dawn x
OPERATION
* resets to Auto Mode at dawn.
TEST
AUTO
TEST 1 5 20 MIN
MANUAL MODE
1 Second
OFF
then
...
... back on.
Flip light switch
off for 1 second
then on
ON-TIME Switch at
1, 5, or 20 minutes
Mode Switching Summary
Dual Light Level Control
Light comes on half bright for selected time
after dusk (Off, 3 hr., 6 hr., until dawn). If
motion is sensed, the light turns on full bright
for the ON-TIME (1, 5, or 20 minutes) then
returns to dim mode.
Requirements
• The Light Control requires 120 volts AC.
• If you want to use Manual Override, the
control must be wired through a switch.
• Some codes require installation by a
qualified electrician.
3 Wire Connectors
3 Screws
Post Light
Adapter
MANUAL MODE
AUTO
TEST
TEST 1 5 20
ON-TIME
Off 3 6 Dusk to Dawn
ACCENT
Put ON-TIME switch on the sensor bottom to
TEST and the Dual Light Level (ACCENT)
switch OFF.
* If you get confused while switching modes,
turn the power off for one minute, then back
on. After the calibration time the control will
be in the AUTO mode.
Set ON-TIME switch to
1, 5, or 20 minutes.
Manual mode only works at
night because daylight re-
turns the sensor to AUTO.
Flip the light switch off for one
second then back on to toggle
between AUTO and MANUAL
MODE.
Manual mode works only with
the ON-TIME switch in the 1,
5, or 20 position.
GUARDIAN PRO
™
POST SENTRY
Comments to this Manuals