1
w w w . A u t o m a t i o n D i r e c t . c o m
1 - 8 0 0 - 6 3 3 - 0 4 0 5
STRIDE™ INDUSTRIAL UNMANAGED ETHERNET SWITCH
5-PORT WITH FIBER – DATA SHEET
3505 HUTCHINSON ROAD
CUMMING, GA 30040-5860, USA
NN
OOTTEE
::
D
IMENSIONS, INSTALLATION AND WIRING INFORMATION IS
SHOWN ON THE BACK OF THIS DATA SHEET.
SE-SW5U-ST &
SE-SW5U-SC
Copper RJ45 Ports: (10/100BaseT)
10/100BaseT ports
Shielded RJ45
Protocols supported
All standard IEEE 802.3
Ethernet compliancy
IEEE 802.3, 802.3u, 802.3x
Auto-crossover
Yes, allows you to use straight-through or crossover wired cables
Auto-sensing operation
Yes, Full and half duplex
Auto-negotiating
Yes, 10BaseT and 100BaseT
Auto-polarity
Yes, on the TD and RD pair
Flow control
Automatic
Ethernet isolation
1500 VRMS 1 minute
Plug and play
Yes
Cable requirements
Twisted pair (Cat. 5 or better) (shielded recommended)
Max. cable distance
100 meters
Fiber Port: (100BaseFX multimode)
100BaseFX ports
1
Fiber port mode
Multimode (mm)
Fiber port connector
ST - models SE-SW5U-ST and SE-SW5U-ST-WT
SC - models SE-SW5U-SC and SE-SW5U-SC-WT
Optimal fiber cable
50/125 or 62.5/125 µm
Center wavelength
1300 nm
Multimode
Links up to 4 km typ.; 1300 nm; use with 50 or 62.5/125 um fiber
Transmitter power (dB): -21 min, -17 typ, -14 max
Receiver sensitivity (dB): -34 typ, -31 max
Nominal max. distance
(full duplex)
4 km
Half and full duplex
Full duplex
Ethernet compliance
100BaseFX
Eye safety (laser)
IEC 60825-1, Class 1; FDA 21 CFR 1040.10 and 1040.11
Safety Standards:
Electrical Safety
European
Directives
US Emissions
WEEE Compliant RoHS Compliant
RoHS
NN
OOTTEE
::
F
OR ADDITONAL PRODUCT DETAILS, A USER MANUAL,
SE-USER-M, IS AVAILABLE AS A DOWNLAODABLE PDF FILE FROM THE
ONLINE DOCUMENTATION AREA OF THE
AA
UUTTOOMMAATTIIOONN
DD
IIRREECCTT
WEB
SITE.
General Specifications
Ethernet switch type
5 ports
Operating mode
Store and forward wire speed switching, non-blocking
Devices supported
All IEEE 802.3 compliant devices are supported
Standards
IEEE 802.3, 802.3u, 802.3x
MAC addresses
1024 addresses
Memory bandwidth
3.2 Gbps
Latency for
10 Mbps ports
16 us + frame time (typical)
Latency for
100 Mbps ports
5 us + frame time (typical)
Power input
Redundant Input Terminals
Input power
(typical with all ports
active at 100 Mbps)
3.0 W
Input voltage
10-30 VDC (continuous) - Class 2 Power Supply
Reverse power protection
Yes
Transient protection
15,000 watts peak
Spike protection
5,000 watts (10x for 10 uS)
Ethernet isolation
1500 VRMS 1 minute
Operating temperature
range
SE-SW5U-ST
SE-SW5U-SC
-10 to +60 °C (+14 to +140 °F),
cold startup at -10 °C (+14 °F)
SE-SW5U-ST-WT
SE-SW5U-SC-WT
-40 to +85 °C (-40 to +185 °F),
cold startup at -40 °C (-40 °F)
Storage temperature range
-40 to +85 °C (-40 to +185 °F)
Humidity
(non-condensing)
5 to 95% RH
Environmental Air
No corrosive gasses permitted
Vibration, shock & freefall
IEC68-2-6, -27, -32
Agency Approvals
UL/cUL 508, CSA C22 per EN61010-1,
UL/cUL 1604 (Class 1, Div. 2, Groups A, B, C, D),
CSA C 22.2/213 9 per EN50021/EN60079-15
(Zone 2, Category 3), CE (ATEX)
EMI emissions
FCC part 15, ICES-003, EN55022
EMC immunity
IEC61326-1
Hazardous locations
UL1604, CSA C22.2/213 (Class I, Div.2) (file #E200031);
EN50021/EN60079-15 (Zone2)
RoHS and WEEE
RoHS (Pb free) and WEEE compliant
Packaging and protection
SE-SW5U-ST
SE-SW5U-SC
UL94VO Lexan, IP30
SE-SW5U-ST-WT
SE-SW5U-SC-WT
Aluminum IP30
Dimensions (L x W x H)
See mechanical diagrams for details
Weight
SE-SW5U-ST 4 oz (0.11 kg)
SE-SW5U-ST-WT 6 oz (0.17 kg)
SE-SW5U-ST-WT &
SE-SW5U-SC-WT
Description:
STRIDE SlimLine Industrial Unmanaged Ethernet Switch with four
10/100BaseT RJ45 Ethernet ports and one multimode 100BaseFX
fiber port, ST or SC type connector depending on model. Redundant
power inputs with surge and spike protection. Auto-crossover. DIN rail
mounting. Supports store & forward wire speed switching and full-
duplex with flow control. UL, CSA (CUL), & CE. The -WT models
have a metal case and are rated for a wider temperature range, from
-40° to 85°C.
Metal case designed
for -40° to 85°C.
Comments to this Manuals