Atlas MLGS180W User Manual

Browse online or download User Manual for Unknown Atlas MLGS180W. Atlas MLGS180W User's Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 4
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Requirements
The Light Control requires 120-volts AC.
If you want to use Manual Mode, the control must
be wired through a switch.
Some codes require installation by a quali-
fied electrician.
240-029-A
© 2003 Atlas Lighting Products, Inc. 598-1096-01
Features
Turns on lighting when motion is detected.
Automatically turns lighting off.
Photocell keeps the lighting off during daylight
hours.
LED indicates motion was sensed (day or night).
Models MLGS180B
MLGS180W
Mode: On-Time: Works: Day Night
Test 5 Sec x x
Auto 1, 5, 10 min. x
Manual Until Dawn* x
OPERATION
* resets to Auto Mode at dawn.
Note: When first turned on wait about 1
1
/
2
minutes
for the circuitry to calibrate.
ON-TIME
10 5 1 TEST
10 5 1 TEST
ON-TIME
... back on.
1 Second OFF
then...
Put the ON-TIME switch in the 1,
5, or 10 minute position.
Put the ON-TIME switch on the
bottom of the sensor in the TEST
position.
Manual mode only works at night
because daylight returns the sen-
sor to AUTO.
Flip the light switch off for one
second then back on to toggle
between AUTO and MANUAL
MODE.
Manual mode works only with the
ON-TIME switch in the 1, 5, or 10
position.
Move ON-TIME Switch to
1, 5, or 10 minutes
Mode Switching Summary
Flip light switch off
for one second
then back on*
MANUAL MODE
AUTO
TEST
* If you get confused while switching modes, turn
the power off for one minute, then back on. After
the calibration time the control will be in the
AUTO mode.
TEST
AUTO
MANUAL MODE
GUARDIAN PRO
MOTION SENSOR
Page view 0
1 2 3 4

Summary of Contents

Page 1 - GUARDIAN PRO

Requirements• The Light Control requires 120-volts AC.• If you want to use Manual Mode, the control mustbe wired through a switch.• Some codes require

Page 2 - INSTALLATION

-2-598-1096-01❒ Swing the sensor head towards the clampscrew.For eave mount only:ControlsINSTALLATIONWIRE THE LIGHT CONTROL.❒ Turn power off at the fu

Page 3 - SPECIFICATIONS

-3-598-1096-01MotionLeast Sensitive Most SensitiveSensorMotionThe sensor is less sensitive to motion directlytowards it, most sensitive to motion acro

Page 4 - TROUBLESHOOTING GUIDE

-4-598-1096-01TROUBLESHOOTING GUIDEIf you experience a problem with your Light Control, first follow this guide. For additional assistance write to:At

Comments to this Manuals

No comments