Atlas F6-MF Owner's Manual Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 16
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
Owner’s Manual
F6-AMIX
Multi-Function Analog Mixer Card
AtlasSound.com – 8 –
Specifications are subject to change without notice.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
Installation
Important: All F6-MF accessory modules must be installed by a qualified technician.
1. Set the AC Mains Power Switch of the F6-MF to the OFF position.
2. Unplug the F6-MF AC Mains power cord from the AC source.
3. Wait 10 minutes before installing the module.
4. Remove the four screws holding the F6 Accessory Input plate. Note: Do not lose the screws,
they will be needed again.
5. Carefully pull the panel assembly 4" to 5" away from the main chassis. Carefully remove the six
cables from the PCB headers. Note: Do not pull on the cable wire. Only pull on the connector
itself or damage may occur.
Page view 7
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments